New Parts Accessories Product Arrivals
Replacement Pivot Bushing Hardware Kit for Dexter Suspension Equalizers
Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- Dexter
Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators
In Stock
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Disc Brakes
- Solenoid
- Dexter
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Right Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 15K lb Dexter Axles
In Stock
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Copper Crush Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter
Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Hardware
- Caliper Parts
- Washers
- Dexter
Replacement Inner Member for Dexter XR84 Actuator - Triple Axle w/ Disc - 2" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Cap for Dexter Single Hydraulic Jack Add-On w/ Selector Valve 12,000 lbs
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.
- Accessories and Parts
- Trailer Jack
- Electric Winch
- Caps
- Dexter
Replacement Caliper Retaining Bolt for Dexter 6,000-lb to 8,000-lb Hydraulic Disc Brakes
Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 7000 lbs
- 6000 lbs
- 8000 lbs
- Hardware
- Caliper Parts
- Bolts
- Dexter
Dexter Grease Zerks for E-Z Lube and Nev-R-Lube Axles - Press-In - 1/4" OD x 5/16" Long
In Stock
Keep your Dexter axle properly lubed with these press-in grease zerks. Designed for E-Z Lube and Nev-R-Lube axles, they let you easily attach a grease gun for routine maintenance. Measures 1/4" outer diameter x 5/16" length.
- Accessories and Parts
- Trailer Spindles
- Grease Zerk
- Dexter
Replacement Inner Member Dexter XR84 Actuator - Single/Tandem w/ Disc - 2" Ball - 8.4K
In Stock
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Inner Member Dexter A-84 Actuator - Single/Tandem w/ Disc - 2-5/16" Ball 8.4K
In Stock
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Grease Cap Plug for Dexter Axle E-Z Lube Grease Caps - Qty 2
In Stock
Replacement Trailer Grease Cap Plugs for E-Z Lube Grease Caps
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- Dexter
Dexter Disc Brake Assembly - 9.6" Hub/Rotor - 5 on 4-1/2 - GalvX - 3,500 lbs
Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- RH
- LH
- 3500 lbs
- Brake Assembly
- Hub and Rotor Assembly
- Dexter
Replacement Shoe and Roller for Dexter 15K 12-1/4" x 5" Air Brakes - Passenger Side
Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.
- Accessories and Parts
- Trailer Brakes
- Brake Shoes
- Dexter
Replacement Inner Member for Dexter/Tie Down LP80, LP85 and LP8500 Brake Actuators
This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Inner Member
- Dexter
Replacement Copper Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter - Qty 4
Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Caliper Parts
- Hardware
- Washers
- Dexter
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Left Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 9-10K lb Dexter Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Curt Steel Winch Cable with Hook - 25' x 3/16" - 4,200 lbs
In Stock
For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.
- Accessories and Parts
- Electric Winch
- Trailer Winch
- Cables and Straps
- 3/16 Inch Diameter
- 4200 lbs
- Wire Rope
- CURT
Replacement Heavy-Duty L-Pin and Clip for Curt TruTrack Weight Distribution System w/ Sway Control
Replaces the heavy-duty L-pins and clips from your Curt TruTrack 2P trunnion weight distribution system with integrated active sway control (17355) or support brackets (17517, 17518, and 17519).
- Accessories and Parts
- Weight Distribution Hitch
- Pins and Clips
- CURT
Curt Hand Winch Strap with Hook - 23' x 2-3/8" - 4,800 lbs
For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 22-3/8 Inch Wide
- 1600 lbs
- Straps
- CURT
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
In Stock
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- CURT
Replacement Hardware Kit for Curt Tow Bar Base Plate 70129
Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.
- Accessories and Parts
- Tow Bar Base Plate
- Hardware
- CURT
Replacement Mounting Bracket for Curt NEXT Brake Controllers
In Stock
Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.
- Accessories and Parts
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- CURT